The Cordless White kettle's interior and lid are made of 304 stainless steel. The kettle body is separated from the power base, which rotates 360 degrees and features a cord storage compartment. A transparent side-mounted water level window with clear scales is featured. The spout is equipped with a removable fine-mesh filter and a drip-proof rim. The top digital display and function buttons are integrated into the kettle. This is an all-white cordless kettle.
The white, matte finish is fingerprint-resistant, and the metal buttons and hidden heating plate create a seamless look. The Cordless White Kettle weighs approximately 1,500 grams and has a handle approximately 30mm thick, providing a stable grip. The water level window is marked in 0.25-liter increments, preventing misplaced filling and tidying up countertops.
The 220-240V version has a power of 1,800 watts, while the 110-120V version has a power of 1,500 watts. One liter of cold water boils in about three and a half minutes, while 1.5 liters boils in five to six minutes. The heating plate distributes heat in a concentrated manner, providing a smooth temperature rise curve and continuous operation without noticeable thermal lag.
The temperature can be set from 40°C to 100°C in 5-degree increments, with a closed-loop sensing accuracy of ±1°C. Preset settings include 70°C, 80°C, 85°C, 90°C, and 100°C, with the screen displaying the current temperature and remaining hold time. 92°C to 96°C is recommended for pour-over coffee, while 80°C is commonly used for green tea, ensuring consistent temperature differences during continuous brewing.
With a split power supply, the Cordless White Kettle can be moved and poured simply by lifting it. The base has a diameter of approximately 165mm and features a 360-degree rotational position. The nickel-plated copper ring contacts maintain reliable continuity after 10,000 plug-in and unplug cycles. The power cord is 0.75 meters long, and the three-section cord storage compartment allows for smooth placement even on narrow countertops.
The sound pressure level at one meter is no more than 52 decibels, and the lid opening damping reduces metallic reverberation. The beep tone is adjustable in three levels and can be muted, and night mode automatically dims the backlight. The open-plan living and dining areas and conference areas maintain quiet operation during both continuous heating and constant temperature phases, ensuring uninterrupted communication.
The inner and outer steel shells create an insulated chamber, keeping the outer surface temperature rise below 45°C. The drip-proof spout and lid guide grooves prevent steam from dripping back into the kettle, ensuring smooth pouring and a clean surface. This makes long-term holding and moving easier.
The kettle, lid lining, spout lining, and filter are all made of 304 stainless steel, with a food-grade silicone seal. This ensures odor-free long-term contact with hot water. The filter has a pore size of approximately 150 microns, trapping larger scale particles for clearer water.
The Cordless White Kettle features a built-in Strix thermostat, automatic power off upon boiling, automatic cutoff for dry boiling due to lack of water, and a redundant 10-amp overcurrent fuse. A boiling detection function reduces power before overflowing. The four-point anti-slip base and water guide grooves keep condensation away from electrical areas, ensuring peace of mind for daily use.
The keep-warm setting can range from 40°C to 90°C, with durations ranging from 30 to 120 minutes. A two-hour keep-warm setting at 60°C consumes approximately 0.3 kWh of electricity, and standby power consumption is no more than 0.5 watts. A pulsed heating strategy is used when the temperature difference is less than two degrees, and long-term water reserve reduces energy consumption fluctuations.
The kettle's opening angle is approximately 75 degrees, and the opening diameter is approximately 110 mm, allowing for direct hand cleaning. It is recommended to descale the kettle monthly using citric acid at a ratio of 5 grams to 1 liter of water. After the heating cycle, let it sit for 20 minutes before rinsing with clean water. The filter quickly releases in two steps, and the white exterior cleans easily with a wipe.
Set the temperature to 80°C and 100°C for preparing milk powder and boiling water for oatmeal. The one-hour keep-warm feature covers meal times, and double-layer insulation reduces the risk of accidental contact on a crowded countertop. The wires are routed along the edge of the wire storage area, leaving only neatly arranged cordless white kettles and cups on the countertop. A simple wipe after meals restores the water to a tidy state.
Water usage peaks significantly in the morning and afternoon on weekdays. The temperature is set at 92 degrees Celsius for pour-over coffee and 85 degrees Celsius for oolong and green tea. Silent and low-light modes maintain a quiet atmosphere. Administration reviews reheating times and holding times weekly and arranges for rapid descaling, ensuring continuous and stable water supply throughout the day.
The study area emphasizes low noise and safety, with a sound pressure level of 52 decibels to prevent disruption to study. A constant temperature of 45 degrees Celsius is provided for long-term drinking, and the temperature rise of the exterior wall is controlled, allowing for safe storage even during peak borrowing times. Before closing, the administrator completes the holding period and cleans the water, allowing it to be used immediately upon opening the next day.
Before check-in, set the kettle to 90 degrees Celsius and hold it for 120 minutes, allowing guests to brew hot drinks upon arrival. After check-out, reset the kettle by boiling it with fresh water and wiping the exterior. Complete the descaling card and multilingual instructions. The white exterior harmonizes with the light wood furnishings, and night mode reduces screen brightness to minimize distractions.
The reception bar requires cleanliness and efficiency, with two quick-change settings, 60°C and 100°C, to accommodate coffee and tea needs. Front desk staff use pulse insulation to maintain a constant temperature during peak customer traffic hours. During breaks, filters are rinsed and surfaces are wiped, ensuring the water collection area is always fresh.
Due to the fluctuating visitor flow in the exhibition hall, the device operates at 94°C for pour-over demonstrations, with silent prompts to avoid interruptions. After the event, the device switches to 60°C to preheat and clean the equipment. The power cord is stored in the base, allowing for easy movement to the next booth without clutter.
Between shoots, water is centrally collected, with 90-95°C for ready-to-drink hot tea and coffee. Nighttime shooting minimizes backlighting and prompts. The drip-proof spout and water guide groove minimize water stains on the countertop, allowing staff to quickly wipe it clean between scenes, ensuring seamless filming.
Night shifts provide warm water at a constant 45°C, with silent mode and low backlighting to prevent disturbing patients' rest. The scald-resistant exterior and automatic power-off mechanism reduce the risk of misuse at night. Shift handovers require only checking the water level and seal fit, and registering the descaling date. Operation is smooth and controllable throughout the day.
Previous: White Cordless Kettle
Next: Cordless Kettle White