The Contemporary White Jug Kettle features a matte white exterior, 304 stainless steel lining for the interior and lid, and a concealed heating plate seamlessly transitioning to a rounded spout. The lid opens with a push button, and a long window on the side clearly indicates the water level. The base features a 360-degree rotating power supply and cord storage compartment, and the top touchscreen integrates the digital temperature display. The Contemporary White Jug Kettle's restrained lines complement modern kitchens and office countertops.
The temperature range is 40–100°C in 5°C increments. A closed-loop sensor matching algorithm provides ±1°C stability. Preset buttons for 70, 80, 85, 90, 95, and 100°C are included, and the screen displays the current water temperature and remaining hold time. The last setting is remembered upon power failure, and a three-second press activates the child lock. Pour-over coffee can be set to 92–96°C, while green tea is typically brewed at 80°C, ensuring a low-temperature brew without burning your mouth.
Rated at 1800W for 220–240V, 1500W for 110–120V; 1.0L of tap water boils in approximately 3 minutes and 30 seconds, 1.7L in approximately 5–6 minutes. The concealed heating plate reduces scale buildup and improves heat exchange efficiency. Nickel-plated contacts are tested for 10,000 plug-in and plug-out cycles. The copper ring on the base reduces contact resistance, maintaining a stable heating curve even with continuous starts and stops.
Operating sound pressure ≤ 52dB(A) at one meter, with optimized acoustic grading for heating and insulation. The lid opens with a damping function to prevent metallic reverberation. The beep tone can be adjusted to three levels or completely silent, and night mode automatically reduces brightness and volume. Ideal for open living and dining areas, conference rooms, or apartment rooms, fetching water late at night is effortless.
Equipped with a Strix thermostat, automatic power shutoff upon boiling, dry-boil protection, and dual redundant 10A overcurrent fuses. The double-walled Contemporary White Jug Kettle creates an insulated chamber, keeping the outer surface temperature rise ≤45°C. Four non-slip feet and a water channel on the base prevent condensation from spilling onto electrical components in the event of an accidental tipping. The power cord is 0.75m long, and the cord storage compartment features three slots for easy management.
The kettle, lid, and filter are all 304 stainless steel, and the contact materials have passed relevant food contact tests. The drip-proof spout prevents backflow and dripping. The removable fine-mesh filter, approximately 150 microns in diameter, traps large scale particles and tea leaves. The electrolytically polished interior reduces adhesion and can be restored to a smooth finish with regular rinsing.
The holding temperature range is 40–90°C, with a duration of 30–120 minutes. The ECO strategy provides pulsed heating when the temperature difference is ≤2°C, reducing frequent starts and stops. A two-hour hold at 60°C consumes approximately 0.3kWh of power, and ≤0.5W in standby mode. The on-screen display shows power consumption and remaining time in real time, making it easier to manage energy consumption over long periods of water storage.
The handle is approximately 30mm thick, with micro-textures on the inside for enhanced grip. The opening angle of the spout is approximately 75°, and the opening diameter is approximately 110mm for easy cleaning. The spout has a flow rate of approximately 0.4l/min, ensuring continuous filling. The top touchscreen allows for switching between °C and °F, as well as a one-touch reset. The matte white exterior is fingerprint-resistant and cleans easily with a wipe.
Available in two versions: 110–120V/60Hz and 220–240V/50–60Hz. Complies with ETL, CE, RoHS, and REACH requirements. Recommended operating environment: 5–35°C, relative humidity ≤85%. A multilingual quick guide and descaling advice card are included, allowing for initial setup right out of the box.
Two morning presets: 80°C and 100°C, for preparing milk powder and boiling water for oatmeal. 60-minute heat retention covers the entire family's mealtime schedule. The double-layer insulated exterior remains warm even on crowded countertops, and the water level indicator, with 0.25l increments, makes it easy to manage water additions. The cable take-up compartment runs flush against the edge, keeping countertops fresh and refreshing with a simple wipe after meals.
Peak water usage is peak during weekday mornings and afternoons. The temperature is set to 92°C for pour-over coffee and 85°C for oolong and green tea. The screen brightness is low and the beeping sound is silent to maintain a quiet atmosphere. Administration schedules a weekly citric acid descaling procedure, and the filter is quick-detachable and rinses in two minutes. Asset labels record the number of heating cycles and holding time, making daily inspections more intuitive.
Before check-in, set the kettle to 90°C for 120 minutes, allowing guests to brew hot drinks upon arrival. After check-out, empty the kettle and wipe the outer casing with fresh water, complete the descaling card, and replace it with the multi-lingual instructions. The matte white finish harmonizes with the light wood and linen furnishings. Night mode reduces screen brightness and beeping volume, ensuring no glare or interruptions when getting water at night.
During peak hours, continuous brewing maintains a stable 94°C water flow, with a temperature differential controlled within ±1°C to minimize extraction fluctuations. During closing hours, the temperature is switched to 60°C for equipment cleaning and cup warming. The spout provides continuous water flow, and the base rotates 360 degrees for easy access. The conductive contacts withstand frequent starts and stops, ensuring smooth curves throughout the day and efficient bar flow.
Classes require multiple water temperature demonstrations, with one-touch switching from 40–100°C, allowing students to intuitively observe temperature changes and brewing differences. The 90-minute heat retention system covers a single class, eliminating the need to restart during breaks. A fine-mesh filter traps tea residue to keep the kettle fresh, and the all-steel inner tank is odor-free, ensuring high reproducibility.
The night shift is set to a constant temperature of 45°C for instant access. The exterior wall temperature rise is controlled, ensuring ease of handling. The beeping sound and low screen brightness prevent disturbing infants. Water levels and filter cleanliness are verified at the end of each shift. A one-touch child lock prevents accidental activation, allowing formula mixing to be carried out reliably in a quiet environment.
Previous: Cordless Kettle White
Next: White Digital Kettle